fbpx

2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter

KShs60,000

Sold By: Official Store

In stock

The 2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter main functions include converting the DC power into Ac Power to drive the pump, and real-time adjust the output frequency to achieve the maximum power point tracking. The inverter is appropriate for single-phase pumps with power requirements below 2200 Watts. Output 1/3 phase 220V 50/60Hz

Ac input 1 Phase 220V 50/60Hz

Solar input 200~450VDC

Hybrid AC Power Input

Compare

2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter

  1. Working time,
  2. Hybrid/stop,
  3. Dry-run Software protection,
  4. Water Sensor, AC output Voltage,
  5. AC output Phase loss,
  6. Easy Inverter Working Time Calibration,
  7. Over -Current or Over Load,
  8. Factory Reset
Stop reason: SPMCS, Timer, Solar Low Power, Hybridstart and stop, Water tank Full, Borehole level low(Pump dry-run), Pump dry-run by software, Pump over current, Overload, Overvoltage, Pcb ic error, Pump wire is broken…
Warning message E2prom, hybrid , Pump current unbalance, Current sensor, such as W: System TimeError message: Over voltage, AC output over Current…and so on…
Solar panel Input Voltage & Current, and Power, Hybrid State, Power input of solar and AC, AC Output Frequency & Current, Inside Temperature, Water Level state of borehole and Tank, Warning Message, Error Message

Additional information

Type

Hybrid, Offgrid

Be the first to review “2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter”

Reviews

There are no reviews yet.

Vendor Information

Hi there. Thanks for stopping by. How can we help you today!

Main Menu

2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter

2.2 Kilowatts Hober Hybrid MPPT Solar Water Pumping inverter

KShs60,000

Add to Cart