Hober 11Kw Solar Pumping Inverter (15HP) MPPT Hybrid (3 Phase) vfd IP65

Description

Hober 11Kw Solar Pumping Inverter MPPT Hybrid (3 Phase) System

The Hober 11Kw Solar Pumping Inverter main functions include converting the DC power into Ac Power to drive the pump, and real-time adjust the output frequency to achieve the maximum power point tracking. The inverter is appropriate for single-phase pumps with power requirements below 11000 Watts.

1. Working time,
2. Hybrid/stop,
3. Dry-run Software protection,
4. Water Sensor, AC output Voltage,
5. AC output Phase loss,
6. Easy Inverter Working Time Calibration,
7. Over -Current or Over Load,
8. Factory Reset

11kw Hober MPPT Solar Water Pumping Inverter Product feature:

1.  Applies to the use of three-phase asynchronous motor pump;
2. With maximum power point tracking algorithm for dynamic VI, fast response speed, good stability, the efficiency of MPPT 99%;
3. Fully automatic operation, can according to the actual situation to set free the speed range of pumps
4. Using efficient SVPWM algorithm, the main circuit and high reliability, the highest conversion efficiency up to 98% ;
5. Intelligent recognition of input voltage range, without the need to manually adjust the open circuit voltage, maximum power point voltage
6. No button set to run automatically, only a switch control stop and boot;
7. The maximum flow support manually controlled, prevent  stop and boot repeatedly when water less or less needs of water
8. The function of protecting the motor complete, can choose the upper and lower water level monitoring and control circuit, to prevent dry or over flow‘s pumping;
9. Aluminum alloy shell, protection grade IP52, use environment temperature: -20 c~  50 c
10. Allows a wide range of input voltage, L type 200-450Vdc, H type of 460-750V
11. With over-voltage, over-current, over temperature protection
12. Input anti reverse function
13. Small size and lower weight

Product Advantages 

The Hober 11Kw Solar Pumping Inverter converter DC(from solar panel) into AC to drive the pump

1. MPPT(99.9%) VFD (Variable Frequency Drive) to improve AC pump’s efficiency
2. Using efficient SVPWM algorithm(98%)
3. Fool-style operation ,Do not need to set any parameter ,just one knob
4. Wide range of input voltage
5. GPRS communication ,phone / computer monitor control
6. Support AC switch
7. Over-voltage, over-current, over temperature , short-circuit function to protect pump
8. The OEM service ,design service ,buyer label service

Typical Hober 11kw inverter Applications include:

• residents living water 
• irrigation
• desert control
• Solar powered Borehole water pumping
• livestock watering
• water treatment projects,etc.

Stop reason: SPMCS, Timer, Solar Low Power, Hybrid start and stop, Water tank Full, Borehole level low(Pump dry-run), Pump dry-run by software, Pump over current, Overload, Overvoltage, Pcb ic error, Pump wire is broken…

Warning message E2prom, hybrid , Pump current unbalance, Current sensor, such as W: System TimeError message: Over voltage, AC output over Current…and so on…

Solar panel Input Voltage & Current, and Power, Hybrid State, Power input of solar and AC, AC Output Frequency & Current, Inside Temperature, Water Level state of borehole and Tank, Warning Message, Error Message

More Details about the Hober 11kw solar water pumping inverter here