DQA 25/60 Water Pump

PUMP

DAYLIFF DQ circulator pumps are designed for hot water circulation in heating, hot water, cooling or air conditioning applications in open or closed systems. A particular feature of the pump design is that the motors have three speed settings so it is possible to select the ideal flow to meet system requirements.

Pump construction is cast iron pump housing, glass fibre reinforced polypropylene impeller, stainless steel rotor and ceramic bearing support. All pumps are supplied complete with female threaded BSP union connections.

MOTOR
The integral 2-pole asynchronous squirrel-cage motor is designed to operate at three speeds. All motors include an inbuilt capacitor and overload protection and can be connected directly to mains supply through a 5A fuse or MCB.

Enclosure Class: IP54      Insulation Class: F     Voltage:1x240V BB  Speed:2900rpm

OPERATING CONDITIONS
Pumped Liquid: Thin, clean, chemically non-aggressive liquids without solids or fibres.
Max Fluid Temperature:-10⁰C -110⁰C. Note the liquid temperature should be higher than the ambient temperature.
Max. Ambient Temperature: 10°C – 50°C
Max. Operating Pressure: 6 bar
Installation: Pumps must be installed with rotor shaft horizontal and vertical water flow.

PUMP DATA