Lorentz PP2000 AC Power Pack

Description

Lorentz  PP2000 AC PowerPack

AC/DC converter to power PS1200 and PS1800 pump systems from a generator or utility power Application

The Problem

Some solar pumps may not provide sufficient flow under all conditions, especially in unusually cloudy weather or when sufficient storage cannot be provided.

The Solution – Lorentz PP2000 AC Power Pack

Lorentz  PP2000 AC PowerPack allows the pump to be powered by an AC generator or commercial utility power. The solar array remains connected. If the sun comes out again, less power
is drawn from the AC source. A common application is for a portable genset (gasoline generator) to run a well pump. When the generator is stopped (or runs out of fuel) the pump automatically returns to solar power when the sunshine is sufficient. No manual switching is required. The PowerPack will power the pump to its full capacity. With some systems, it will produce a greater flow rate than you will see with solar power.

Specifications

 AC input: 240V (±15%), 47 to 63Hz
 AC input current: 6.2A
 PV input voltage: Vmp: 110 –140 VDC,
Umax: 200 VDC
 DC output max.: 180VDC, 1,500 W
 overload protection: internal fuse, 15A
 enclosure: steel, gasket-sealed, indoor-use,
hinged front cover with key-lock
 must be protected from direct mid-day sun
 IP22
 ambient temperature: max. 45°C
Dimensions
 400mm × 300mm × 140mm
15.75 in × 11.8 in × 5.5 in
 weight: 23.5 kg / 52 lbs.

lorentz_pp2000 datasheet