Victron Phoenix 1200va 12v Solar Inverter

Description

Victron Phoenix 1200va 12v Solar Inverter

The 1200VA Victron Energy Phoenix inverter converts the 12V DC power from your leisure batteries into 230V AC power so you can run up to 1200VA of domestic appliances continuously when off-grid. This makes the Victron inverter perfect for off-grid applications such as campervans, boats and tiny houses. The 1200VA pure sine wave inverter will power products such as laptops, blenders and toasters, providing their combined wattage does not exceed 1200VA for a prolonged period. The 1200VA Phoenix inverter model has a UK 3 pin plug connected to the device to allow for easy installation.

The Victron 1200VA inverter does not have built-in Bluetooth or smart connectivity, however, you can pair this Phoenix inverter with the VE.Direct smart dongle to allow you to monitor your inverter’s performance and settings via the Victron Connect app. This will allow you to set a series of programmable alarms and cut-offs to warn you of low and high voltages, as well as being able to disconnect if your battery’s voltage drops below a defined value. You can download the Victron Connect App and access its trial product library to see how you can monitor, operate & configure each component of your system.

Victron Phoenix 1200va 12v Solar Inverter – use case

The Victron Phoenix inverter 1200VA is suitable for off-grid electrical system applications such as for use in campervans, motorhomes, RVs, boats and tiny off-grid houses. It is suitable for anyone whose mains power appliances equal a total wattage of 1200VA or less.

Smart functionality with the addition of the VE.Direct smart dongle – monitor, operate & configure your system

• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• In and output voltage, % load and alarms
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level

Pure sine wave inverter

The Victron Phoenix 1200va 12v Solar Inverter is a pure sine wave inverter. Pure sine wave inverters convert the 12V DC power from your leisure batteries and exactly reproduce the 230V AC waveform you would get from a household mains socket. This means that they can power any 230V appliances. Certain 230V appliances can be damaged or not operate properly when run from a quasi (modified) sine wave inverter.

Proven reliability

Victron inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the Victron Phoenix 1200va 12v Solar Inverter will switch to standby when the load decreases below a preset value (min load: 15VA). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on. This helps to reduce the power consumption of the inverter when not in use.

Remote on/off

A remote on/off switch can be connected to the Victron Phoenix inverter to allow you to turn off the inverter from a control panel rather than using the on/off switch on the unit itself.

Looking for a different rated Victron Energy Phoenix inverter?

View the full range of Victron Phoenix inverters, rated from 250VA-3000VA.